Stretchable T-shirt Fabric Transfers - Ironing and Heat Press Instructions

After you have your design printed out on your transfer paper and you've prepared it for ironing...

Ironing Instructions for STRETCHABLE T-shirt Transfers (for conventional irons):
(Step-by-step video demonstration)

1.  Make sure your iron has no water in it.
2.  Turn off steam setting.
3.  Preheat your iron to a high / cotton setting.
4.  Put a towel down on your ironing surface and then place your T-shirt on top of it.
5.  Put transfer paper face-down on your T-shirt (so that you can see the Avery logos on the back of the paper facing you).
6.  Begin ironing your transfer paper onto your T-shirt using heavy pressure.
   • The amount of time you should be ironing varies by the size of the label that's being ironed:
     • Full sheet: 3 minutes
     • 1/2 sheet: 90 seconds
     • 1/4 sheet: 1 minute
7.  Allow label to cool for 2 minutes.
8.  Carefully peel off the back of the transfer paper. If the label begins to lift off of the T-shirt, continue ironing until you are able to peel off the back without pulling off the label.
9.  Before wearing your T-shirt, wash it inside-out in cold water with a mild detergent and then allow it to dry by laying it flat or by applying low heat.
10. Do not use any fabric softener while washing, as this may cause the transfer to fade, crack, or peel.

• Temperature: 375°F (190°C) - 400°F (204°C)
• Pressure: Medium
• Time: 20 seconds

 Avery Fabric Transfers are guaranteed to look good after 20 washes, when applied and washed according to instructions.